# Why Laboratory Test Results Can Be Wrong: Common Errors, Causes and What Patients Can Do

- Link: https://nohas.es/why-laboratory-test-results-can-be-wrong-common-errors/
- Published: 2026-11-17T23:26:44+00:00
- Author: nohas.es Editorial Team

_Educational information, not medical advice. See our [Medical Disclaimer](https://nohas.es/disclaimer/).
Reviewed for clarity: 17 November 2026._

Blood tests and other laboratory investigations are essential tools in modern healthcare.
They help clinicians assess symptoms, monitor long-term conditions, check how treatments
are working and identify problems that may not be obvious during an examination.
Yet a laboratory result is not automatically perfect. Errors can occur before a 
sample reaches the laboratory, while it is being analysed, or when the result is
recorded, communicated and interpreted.

A result that seems unusual does not necessarily mean that the laboratory has made
a mistake. Normal biological variation, medicines, recent food intake and the timing
of collection can all influence measurements. Understanding the testing process 
can help patients ask sensible questions without becoming unnecessarily alarmed.

![Blood specimen tubes prepared for clinical laboratory testing](https://nohas.es/
wp-content/uploads/2026/11/photo-1606206591513-adbfbdd7a177.jpg)

Reliable results depend on correct patient identification, collection and handling
of each specimen.

## How can laboratory errors happen?

The complete testing process is commonly divided into three stages: pre-analytical,
analytical and post-analytical. Each stage has its own risks. A review of laboratory
quality research highlights that many problems arise outside the actual measurement
process, particularly during preparation and collection. This is why quality assurance
must cover the entire journey from the test request to the clinical decision.

## 1. Pre-analytical errors: before the sample is tested

Pre-analytical errors happen before the laboratory performs the measurement. They
may involve the test request, patient preparation, sample collection, labelling,
storage or transport. These problems are important because even a highly accurate
analyser cannot correct a sample that was collected from the wrong person or handled
incorrectly.

### Incorrect patient identification or labelling

A tube labelled with the wrong name, date of birth or identification number can 
lead to a result being assigned to the wrong person. This is a serious safety risk.
Healthcare staff should confirm identity using the required identifiers and check
that the label matches the request. Patients can help by answering identity questions
clearly and checking their details on paperwork or labels when they are invited 
to do so.

### Not following preparation instructions

Some tests require specific preparation, while others do not. Depending on the investigation,
recent food or drink, strenuous exercise, smoking, posture, stress, the time of 
day and medicines may influence a measurement. Fasting is not required for every
blood test, so patients should not fast unless their clinician or laboratory has
instructed them to. If instructions are unclear, contact the laboratory before the
appointment rather than guessing.

### Collection and specimen problems

Results may be affected if the wrong type of sample is collected, the tube is underfilled,
the sample is contaminated or blood cells are damaged. Haemolysis, which means the
breakdown of red blood cells, can alter certain measurements and may cause the laboratory
to reject the sample or report a limitation. Drawing blood near an intravenous infusion
can also contaminate a specimen with fluid or medication. Correct collection technique
and the right collection tube are therefore essential.

![Laboratory professional examining a specimen through a microscope](https://nohas.
es/wp-content/uploads/2026/11/photo-1727091506038-5451111dc2fb.jpg)

Trained laboratory staff follow standard procedures to help detect specimen and 
testing problems.

### Delays or unsuitable storage

Some samples need to be analysed quickly, kept at a particular temperature or protected
from light. Delays, excessive heat, freezing when not appropriate, or incorrect 
transport can change the stability of some substances. Laboratories provide collection
and transport instructions for this reason. A sample may be rejected if its condition
makes a reliable result impossible.

## 2. Analytical errors: while the laboratory performs the test

Analytical errors occur during the measurement itself. Modern laboratories use calibrated
instruments, validated methods, internal quality controls and external quality assessment
to reduce these risks. Nevertheless, technical problems can still happen.

Possible causes include instrument malfunction, incorrect calibration, unstable 
or expired reagents, power interruptions, maintenance problems, operator mistakes
or interference from substances in the sample. Haemolysis, lipaemia (a high level
of fat particles in the sample) and jaundice-related pigments can interfere with
certain methods. Some medicines, supplements and naturally occurring antibodies 
may also affect specific tests.

![Automated clinical laboratory equipment processing samples](https://nohas.es/wp-
content/uploads/2026/11/photo-1599727277757-3f54e54ea618.jpg)

Automated analysers and quality-control procedures help laboratories monitor measurement
accuracy.

When a quality-control check falls outside acceptable limits, the laboratory should
investigate before releasing affected results. Depending on the situation, staff
may repeat the measurement, inspect the specimen, use another method or request 
a new sample. Repeating a test is not automatically evidence of poor practice; it
can be an appropriate safety measure.

## 3. Post-analytical errors: after the measurement

Post-analytical errors occur after a test has been performed. Examples include typing
or transcription mistakes, incorrect units, a result attached to the wrong patient
record, a delayed report, a missing result or failure to communicate a critical 
value promptly.

Even when the measurement is correct, interpretation can be misleading if the report
is read without the relevant context. Reference intervals vary between laboratories
and methods, and may depend on age, sex and other factors. A value outside the printed
interval does not by itself establish a diagnosis. Equally, a result within the 
interval does not always rule out disease when symptoms or clinical findings suggest
otherwise.

![Laboratory technician handling blood specimen tubes](https://nohas.es/wp-content/
uploads/2026/11/photo-1697192156499-d85cfe1452c0.jpg)

Accurate reporting and clear communication are the final steps in the laboratory
testing pathway.

## What should you do if a result seems wrong?

If a result is unexpected, do not assume immediately that it is either a laboratory
error or proof of a serious illness. Contact the healthcare professional who requested
the test and explain why the result concerns you. They can compare it with previous
results, symptoms, medicines, medical history and the reason the test was ordered.

Useful questions include:

 * Was the sample suitable, and were there any comments or limitations on the report?
 * Could preparation, timing, recent exercise or medication have affected this result?
 * Does the result need to be repeated, confirmed with another method or checked
   with a different test?
 * How does it compare with my previous results and the laboratory’s reference interval?
 * When should I expect follow-up, and what symptoms should prompt urgent care?

Do not stop prescribed medicines, change a dose or start supplements to try to correct
a laboratory value without professional advice. If the result is marked as critical,
or a clinician or laboratory contacts you urgently, follow the instructions promptly.
Seek urgent medical help for severe symptoms such as chest pain, serious breathing
difficulty, fainting or sudden neurological symptoms, regardless of whether a previous
test was reported as normal.

## How laboratories reduce the risk of errors

Quality systems address every stage of testing. Common safeguards include standardised
test requests, two-identifier patient checks, barcode labelling, staff training,
validated collection tubes, documented transport conditions, instrument calibration,
internal quality controls, external proficiency testing, result-validation rules
and procedures for communicating critical findings. Laboratories also investigate
corrected reports and rejected samples to identify recurring problems and improve
processes.

Patients are part of this safety system too. Providing accurate information, following
the instructions given for a particular test, mentioning medicines and supplements,
and checking personal details can reduce avoidable problems. If a sample has to 
be recollected, ask why: the reason may be to protect the reliability of the result.

## Key message

Laboratory errors can arise before, during or after testing, but quality-control
systems are designed to detect and minimise them. An unexpected result deserves 
a careful review, not panic or self-diagnosis. Discuss it with the clinician who
requested the test; a repeat or confirmatory investigation may be appropriate when
the result does not fit the clinical picture.

## Reliable sources

 * [Australian Prescriber: Preparation for blood tests – what can go wrong before the sample reaches the lab (2025)](https://australianprescriber.tg.org.au/articles/preparation-for-blood-tests-what-can-go-wrong-before-the-sample-reaches-the-lab.html)
 * [Errors within the total laboratory testing process: causes, consequences and solutions – review](https://pmc.ncbi.nlm.nih.gov/articles/PMC7271754/)
 * [Preanalytical Errors in Clinical Laboratory Testing at a Glance (2024)](https://pmc.ncbi.nlm.nih.gov/articles/PMC10981510/)
 * [US Centers for Disease Control and Prevention: Clinical Laboratory Improvement Amendments (CLIA)](https://www.cdc.gov/clia/)

_This article is for general educational purposes only. It does not replace medical
advice, diagnosis or treatment from a qualified healthcare professional._

**About the author**
Written by the NOHAS Editorial Team using the sources listed
above. Read our [Editorial Policy](https://nohas.es/editorial-policy/) and [Fact Checking Policy](https://nohas.es/fact-checking-policy/).
Found an error? [Contact us](https://nohas.es/contact-us/).
